sx126x

LoraWAN-MAC-in-C library, adapted to run under the Arduino environment

LoRa Basics Modem LoRaWAN stack

Semtech SX126X LoRa driver for Micropython and CircuitPython.

Portable driver for Semtech SX126x series

Long-Range Frequency Hopping Spread Spectrum (LR-FHSS) transmission demo

LoRa single channel packet forwarder based on the Semtech UDP protocol v2

An Arduino Library for direct (peer-2-peer) LoRa data communication from device to device without the need of LoRaWAN internet connection. Developed for home automation purpose.

PCB design of breakout board for Ebyte E78 (ASR6501 or ASR6601) module

Linux driver for Semtech SX126x series

Implementation of RNode functionality for Linux based on SX126x LoRa modules

ESPHome SX127x driver. SX126x component configures SX1261, SX1262 or SX1268 hardware for use in ESPHome.

Programmable radio communication platform for ESP32 mesh nodes, repeaters and off-grid messaging.

Modular C driver for the Semtech SX126x LoRa transceiver family. Portable, HAL-based, and suitable for embedded systems development.

simple utility to test waveshare's sx126x lorahat.

Library crate for Semtech SX126x register bitfields and commands.

HAL and drivers for AT32F403A/AT32F407 (Cortex-M4F) — STM32-compatible CMSIS, GPIO USART SPI I2C ADC DMA TMR CRM Flash FreeRTOS USB Segger-RTT LoRa SX126x/LLCC68 — ARM GCC CMake • Bilingual EN/RU

Go implementation of the LoRa physical layer for Semtech radios.