Repository navigation
Conversation
…ernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
since there's no requirement to describe them in E820 and some
platforms require ECAM to work (Bjorn Helgaas)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
Le Moal)
- Remove last user and pci_enable_device_io() (Heiner Kallweit)
- Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)
- Skip waiting for devices that have been disconnected while
suspended (Ilpo Järvinen)
- Clear Secondary Status errors after enumeration since Master Aborts
and Unsupported Request errors are an expected part of enumeration
(Vidya Sagar)
MSI:
- Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)
Error handling:
- Mask Genesys GL975x SD host controller Replay Timer Timeout
correctable errors caused by a hardware defect; the errors cause
interrupts that prevent system suspend (Kai-Heng Feng)
- Fix EDR-related _DSM support, which previously evaluated revision 5
but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)
ASPM:
- Simplify link state definitions and mask calculation (Ilpo
Järvinen)
Power management:
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
apparently doesn't know how to put them back in D0 (Mario
Limonciello)
CXL:
- Support resetting CXL devices; special handling required because
CXL Ports mask Secondary Bus Reset by default (Dave Jiang)
DOE:
- Support DOE Discovery Version 2 (Alexey Kardashevskiy)
Endpoint framework:
- Set endpoint BAR to be 64-bit if the driver says that's all the
device supports, in addition to doing so if the size is >2GB
(Niklas Cassel)
- Simplify endpoint BAR allocation and setting interfaces (Niklas
Cassel)
Cadence PCIe controller driver:
- Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)
Cadence PCIe endpoint driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
Freescale Layerscape PCIe controller driver:
- Convert DT binding to YAML (Frank Li)
MediaTek MT7621 PCIe controller driver:
- Add DT binding missing 'reg' property for child Root Ports
(Krzysztof Kozlowski)
- Fix theoretical string truncation in PHY name (Sergio Paracuellos)
NVIDIA Tegra194 PCIe controller driver:
- Return success for endpoint probe instead of falling through to the
failure path (Vidya Sagar)
Renesas R-Car PCIe controller driver:
- Add DT binding missing IOMMU properties (Geert Uytterhoeven)
- Add DT binding R-Car V4H compatible for host and endpoint mode
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
- Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)
- Set the Subsystem Vendor ID, which was previously zero because it
was masked incorrectly (Rick Wertenbroek)
Synopsys DesignWare PCIe controller driver:
- Restructure DBI register access to accommodate devices where this
requires Refclk to be active (Manivannan Sadhasivam)
- Remove the deinit() callback, which was only need by the
pcie-rcar-gen4, and do it directly in that driver (Manivannan
Sadhasivam)
- Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
up things like eDMA (Manivannan Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
to dw_pcie_ep_init() (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
reflect the actual functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from all the glue
drivers, not just those that require active Refclk from the host
(Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which was an obscure way for
glue drivers to indicate that they depend on Refclk from the host
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)
- Add DT binding J722S SoC support (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Add DT binding missing num-viewport, phys and phy-name properties
(Jan Kiszka)
Miscellaneous:
- Constify and annotate with __ro_after_init (Heiner Kallweit)
- Convert DT bindings to YAML (Krzysztof Kozlowski)
- Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
Zhou)"
* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
...
…git/remoteproc/linux Pull rpmsg updates from Bjorn Andersson: "This makes core rpmsg_class const and ensures that the automatic module loading of the Qualcomm glink_ssr driver happens" * tag 'rpmsg-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: rpmsg: qcom_glink_ssr: fix module autoloading rpmsg: core: Make rpmsg_class constant
…git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: "This makes the remoteproc core rproc_class const. DeviceTree bindings for a few different Qualcomm remoteprocs are updated to remove a range of validation warnings/errors. The Qualcomm SMD binding marks qcom,ipc deprecated, in favor or the mailbox interface. The TI K3 R5 remoteproc driver is updated to ensure that cores are powered up in the appropriate order. The driver also see a couple of fixes related to cleanups in error paths during probe. The Mediatek remoteproc driver is extended to support the MT8188 SCP core 1. Support for varying DRAM and IPI shared buffer sizes are introduced. This together with a couple of bug fixes and improvements to the driver. Support for the AMD-Xilinx Versal and Versal-NET platforms are added. Coredump support and support for parsing TCM information from DeviceTree is added to the Xilinx R5F remoteproc driver" * tag 'rproc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (22 commits) dt-bindings: remoteproc: qcom,sdm845-adsp-pil: Fix qcom,halt-regs definition dt-bindings: remoteproc: qcom,sc7280-wpss-pil: Fix qcom,halt-regs definition dt-bindings: remoteproc: qcom,qcs404-cdsp-pil: Fix qcom,halt-regs definition dt-bindings: remoteproc: qcom,msm8996-mss-pil: allow glink-edge on msm8996 dt-bindings: remoteproc: qcom,smd-edge: Mark qcom,ipc as deprecated remoteproc: k3-r5: Jump to error handling labels in start/stop errors remoteproc: mediatek: Fix error code in scp_rproc_init() remoteproc: k3-r5: Do not allow core1 to power up before core0 via sysfs remoteproc: k3-r5: Wait for core0 power-up before powering up core1 remoteproc: mediatek: Add IMGSYS IPI command remoteproc: mediatek: Support setting DRAM and IPI shared buffer sizes remoteproc: mediatek: Support MT8188 SCP core 1 dt-bindings: remoteproc: mediatek: Support MT8188 dual-core SCP drivers: remoteproc: xlnx: Fix uninitialized tcm mode drivers: remoteproc: xlnx: Fix uninitialized variable use drivers: remoteproc: xlnx: Add Versal and Versal-NET support remoteproc: zynqmp: parse TCM from device tree dt-bindings: remoteproc: Add Tightly Coupled Memory (TCM) bindings remoteproc: zynqmp: fix lockstep mode memory region remoteproc: zynqmp: Add coredump support ...
…l/git/jassibrar/mailbox Pull mailbox updates from Jassi Brar: - redo the omap driver from legacy to mailbox api - enable bufferless IPI for zynqmp - add mhu-v3 driver - convert from tasklet to BH workqueue - add qcom MSM8974 APCS compatible IDs * tag 'mailbox-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (24 commits) dt-bindings: mailbox: qcom-ipcc: Document the SDX75 IPCC dt-bindings: mailbox: qcom: Add MSM8974 APCS compatible mailbox: Convert from tasklet to BH workqueue mailbox: mtk-cmdq: Fix pm_runtime_get_sync() warning in mbox shutdown mailbox: mtk-cmdq-mailbox: fix module autoloading mailbox: zynqmp: handle SGI for shared IPI mailbox: arm_mhuv3: Add driver dt-bindings: mailbox: arm,mhuv3: Add bindings mailbox: omap: Remove kernel FIFO message queuing mailbox: omap: Reverse FIFO busy check logic mailbox: omap: Remove mbox_chan_to_omap_mbox() mailbox: omap: Use mbox_controller channel list directly mailbox: omap: Use function local struct mbox_controller mailbox: omap: Merge mailbox child node setup loops mailbox: omap: Use devm_pm_runtime_enable() helper mailbox: omap: Remove device class mailbox: omap: Remove unneeded header omap-mailbox.h mailbox: omap: Move fifo size check to point of use mailbox: omap: Move omap_mbox_irq_t into driver mailbox: omap: Remove unused omap_mbox_request_channel() function ...
When CONFIG_DEBUG_BUGVERBOSE=n, we fail to add necessary padding bytes
to bug_table entries, and as a result the last entry in a bug table will
be ignored, potentially leading to an unexpected panic(). All prior
entries in the table will be handled correctly.
The arm64 ABI requires that struct fields of up to 8 bytes are
naturally-aligned, with padding added within a struct such that struct
are suitably aligned within arrays.
When CONFIG_DEBUG_BUGVERPOSE=y, the layout of a bug_entry is:
struct bug_entry {
signed int bug_addr_disp; // 4 bytes
signed int file_disp; // 4 bytes
unsigned short line; // 2 bytes
unsigned short flags; // 2 bytes
}
... with 12 bytes total, requiring 4-byte alignment.
When CONFIG_DEBUG_BUGVERBOSE=n, the layout of a bug_entry is:
struct bug_entry {
signed int bug_addr_disp; // 4 bytes
unsigned short flags; // 2 bytes
< implicit padding > // 2 bytes
}
... with 8 bytes total, with 6 bytes of data and 2 bytes of trailing
padding, requiring 4-byte alginment.
When we create a bug_entry in assembly, we align the start of the entry
to 4 bytes, which implicitly handles padding for any prior entries.
However, we do not align the end of the entry, and so when
CONFIG_DEBUG_BUGVERBOSE=n, the final entry lacks the trailing padding
bytes.
For the main kernel image this is not a problem as find_bug() doesn't
depend on the trailing padding bytes when searching for entries:
for (bug = __start___bug_table; bug < __stop___bug_table; ++bug)
if (bugaddr == bug_addr(bug))
return bug;
However for modules, module_bug_finalize() depends on the trailing
bytes when calculating the number of entries:
mod->num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry);
... and as the last bug_entry lacks the necessary padding bytes, this entry
will not be counted, e.g. in the case of a single entry:
sechdrs[i].sh_size == 6
sizeof(struct bug_entry) == 8;
sechdrs[i].sh_size / sizeof(struct bug_entry) == 0;
Consequently module_find_bug() will miss the last bug_entry when it does:
for (i = 0; i < mod->num_bugs; ++i, ++bug)
if (bugaddr == bug_addr(bug))
goto out;
... which can lead to a kenrel panic due to an unhandled bug.
This can be demonstrated with the following module:
static int __init buginit(void)
{
WARN(1, "hello\n");
return 0;
}
static void __exit bugexit(void)
{
}
module_init(buginit);
module_exit(bugexit);
MODULE_LICENSE("GPL");
... which will trigger a kernel panic when loaded:
------------[ cut here ]------------
hello
Unexpected kernel BRK exception at EL1
Internal error: BRK handler: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in: hello(O+)
CPU: 0 PID: 50 Comm: insmod Tainted: G O 6.9.1 #8
Hardware name: linux,dummy-virt (DT)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : buginit+0x18/0x1000 [hello]
lr : buginit+0x18/0x1000 [hello]
sp : ffff800080533ae0
x29: ffff800080533ae0 x28: 0000000000000000 x27: 0000000000000000
x26: ffffaba8c4e70510 x25: ffff800080533c30 x24: ffffaba8c4a28a58
x23: 0000000000000000 x22: 0000000000000000 x21: ffff3947c0eab3c0
x20: ffffaba8c4e3f000 x19: ffffaba846464000 x18: 0000000000000006
x17: 0000000000000000 x16: ffffaba8c2492834 x15: 0720072007200720
x14: 0720072007200720 x13: ffffaba8c49b27c8 x12: 0000000000000312
x11: 0000000000000106 x10: ffffaba8c4a0a7c8 x9 : ffffaba8c49b27c8
x8 : 00000000ffffefff x7 : ffffaba8c4a0a7c8 x6 : 80000000fffff000
x5 : 0000000000000107 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff3947c0eab3c0
Call trace:
buginit+0x18/0x1000 [hello]
do_one_initcall+0x80/0x1c8
do_init_module+0x60/0x218
load_module+0x1ba4/0x1d70
__do_sys_init_module+0x198/0x1d0
__arm64_sys_init_module+0x1c/0x28
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xd8
el0t_64_sync_handler+0x120/0x12c
el0t_64_sync+0x190/0x194
Code: d0ffffe0 910003fd 91000000 9400000b (d4210000)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: BRK handler: Fatal exception
Fix this by always aligning the end of a bug_entry to 4 bytes, which is
correct regardless of CONFIG_DEBUG_BUGVERBOSE.
Fixes: 9fb7410 ("arm64/BUG: Use BRK instruction for generic BUG traps")
Signed-off-by: Yuanbin Xie <xieyuanbin1@huawei.com>
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1716212077-43826-1-git-send-email-xiaojiangfeng@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
…kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "New HW support: - Freescale i.MX8ULP edma support in edma driver - StarFive JH8100 DMA support in Synopsis axi-dmac driver Updates: - Tracing support for freescale edma driver, updates to dpaa2 driver - Remove unused QCom hidma DT support - Support for i2c dma in imx-sdma - Maintainers update for idxd and edma drivers" * tag 'dmaengine-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (42 commits) MAINTAINERS: Update role for IDXD driver dmaengine: fsl-edma: use _Generic to handle difference type dmaengine: fsl-edma: add trace event support dmaengine: idxd: Avoid unnecessary destruction of file_ida dmaengine: xilinx: xdma: fix module autoloading dt-bindings: dma: fsl-edma: allow 'power-domains' property dt-bindings: dma: fsl-edma: remove 'clocks' from required dmaengine: fsl-dpaa2-qdma: Fix kernel-doc check warning dmaengine: imx-sdma: Add i2c dma support dmaengine: imx-sdma: utilize compiler to calculate ADDRS_ARRAY_SIZE_V<n> dt-bindings: fsl-imx-sdma: Add I2C peripheral types ID dt-bindings: fsl-dma: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string dmaengine: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string dt-bindings: dma: Drop unused QCom hidma binding dmaengine: qcom: Drop hidma DT support dmaengine: pl08x: Use kcalloc() instead of kzalloc() dmaengine: fsl-dpaa2-qdma: Update DPDMAI interfaces to version 3 dmaengine: fsl-edma: fix miss mutex unlock at an error return path dmaengine: pch_dma: remove unused function chan2parent dmaengine: fsl-dpaa2-qdma: Add dpdmai_cmd_open ...
…/git/phy/linux-phy
Pull generic phy updates from Vinod Koul:
"New HW Support:
- Support for Embedded DisplayPort and DisplayPort submodes and
driver support on Qualcomm X1E80100 edp driver
- Qualcomm QMP UFS PHY for SM8475, QMP USB phy for QDU1000/QRU1000
and eusb2-repeater for SMB2360
- Samsung HDMI PHY for i.MX8MP, gs101 UFS phy
- Mediatek XFI T-PHY support for mt7988
- Rockchip usbdp combo phy driver
Updates:
- Qualcomm x4 lane EP support for sa8775p, v4 ad v6 support for
X1E80100, SM8650 tables for UFS Gear 4 & 5 and correct voltage
swing tables
- Freescale imx8m-pci pcie link-up updates
- Rockchip rx-common-refclk-mode support
- More platform remove callback returning void conversions"
* tag 'phy-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (43 commits)
dt-bindings: phy: qcom,usb-snps-femto-v2: use correct fallback for sc8180x
dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: fix msm899[68] power-domains
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: fix x1e80100-gen3x2 schema
phy: qcpm-qmp-usb: Add support for QDU1000/QRU1000
dt-bindings: phy: qcom,qmp-usb: Add QDU1000 USB3 PHY
dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QDU1000
phy: qcom-qmp-pcie: add x4 lane EP support for sa8775p
phy: samsung-ufs: ufs: exit on first reported error
phy: samsung-ufs: ufs: remove superfluous mfd/syscon.h header
phy: rockchip: fix CONFIG_TYPEC dependency
phy: rockchip: usbdp: fix uninitialized variable
phy: rockchip-snps-pcie3: add support for rockchip,rx-common-refclk-mode
dt-bindings: phy: rockchip,pcie3-phy: add rockchip,rx-common-refclk-mode
phy: rockchip: add usbdp combo phy driver
dt-bindings: phy: add rockchip usbdp combo phy document
phy: add driver for MediaTek XFI T-PHY
dt-bindings: phy: mediatek,mt7988-xfi-tphy: add new bindings
phy: freescale: fsl-samsung-hdmi: Convert to platform remove callback returning void
phy: qcom: qmp-ufs: update SM8650 tables for Gear 4 & 5
MAINTAINERS: Add phy-gs101-ufs file to Tensor GS101.
...
…kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: - cleanup and conversion for soundwire sysfs groups - intel support for ace2x bits, auxdevice pm improvements - qcom multi link device support * tag 'soundwire-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (33 commits) soundwire: intel_ace2.x: add support for DOAISE property soundwire: intel_ace2.x: add support for DODSE property soundwire: intel_ace2x: use DOAIS and DODS settings from firmware soundwire: intel_ace2x: cleanup DOAIS/DODS settings soundwire: intel_ace2x: simplify check_wake() soundwire: intel_ace2x: fix wakeup handling soundwire: intel_init: resume all devices on exit. soundwire: intel: export intel_resume_child_device soundwire: intel_auxdevice: use pm_runtime_resume() instead of pm_request_resume() ASoC: SOF: Intel: hda: disable SoundWire interrupt later soundwire: qcom: allow multi-link on newer devices soundwire: intel_ace2x: use legacy formula for intel_alh_id soundwire: reconcile dp0_prop and dpn_prop soundwire: intel_ace2x: set the clock source soundwire: intel_ace2.x: power-up first before setting SYNCPRD soundwire: intel_ace2x: move and extend clock selection soundwire: intel: add support for MeteorLake additional clocks soundwire: intel: add more values for SYNCPRD soundwire: bus: extend base clock checks to 96 MHz soundwire: cadence: show the bus frequency and frame shape ...
…kernel/git/andy/linux-gpio-intel Pull intel-gpio fixes from Andy Shevchenko: - NULL pointer dereference fix in GPIO APCI library - Restore ACPI handle matching for GPIO devices represented in banks * tag 'intel-gpio-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel: gpiolib: acpi: Fix failed in acpi_gpiochip_find() by adding parent node match gpiolib: acpi: Move ACPI device NULL check to acpi_can_fallback_to_crs()
…kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix the MediaTek lvts_thermal driver and the handling of trip
points that start as invalid and are adjusted later by user space via
sysfs.
Specifics:
- Fix and clean up the MediaTek lvts_thermal driver (Julien Panis)
- Prevent invalid trip point handling from triggering spurious trip
point crossing events and allow passive polling to stop when a
passive trip point involved in it becomes invalid (Rafael Wysocki)"
* tag 'thermal-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Fix the handling of invalid trip points
thermal/drivers/mediatek/lvts_thermal: Fix wrong lvts_ctrl index
thermal/drivers/mediatek/lvts_thermal: Remove unused members from struct lvts_ctrl_data
thermal/drivers/mediatek/lvts_thermal: Check NULL ptr on lvts_data
…nel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These make the ACPI EC driver always install the EC address space handler at the root of the ACPI namespace which causes it to take care of all EC operation regions everywhere. This means that the custom EC address space handler in the WMI driver is not needed any more and accordingly it gets removed altogether" * tag 'acpi-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: platform/x86: wmi: Remove custom EC address space handler ACPI: EC: Install address space handler at the namespace root
…l/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the amd-pstate driver and the operating performance point
(OPP) handling related to generic PM domains.
Specifics:
- Fix a memory leak in the exit path of amd-pstate (Peng Ma)
- Fix required_opp_tables handling in the cases when multiple generic
PM domains share one OPP table (Viresh Kumar)"
* tag 'pm-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
OPP: Fix required_opp_tables for multiple genpds using same table
cpufreq: amd-pstate: fix memory leak on CPU EPP exit
…ernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM discard regressions due to DM core switching over to using queue_limits_set() without DM core and targets first being updated to set (and stack) discard limits in terms of max_hw_discard_sectors and not max_discard_sectors - Fix stable@ DM integrity discard support to set device's discard_granularity limit to the device's logical block size * tag 'for-6.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: always manage discard support in terms of max_hw_discard_sectors dm-integrity: set discard_granularity to logical block size
…ux/kernel/git/efi/efi Pull EFI fix from Ard Biesheuvel: - Followup fix for the EFI boot sequence refactor, which may result in physical KASLR putting the kernel in a region which is being used for a special purpose via a command line argument. * tag 'efi-fixes-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: x86/efistub: Omit physical KASLR when memory reservations exist
…/kernel/git/gerg/m68knommu Pull m68knommu update from Greg Ungerer: . remove use of kernel config option from uapi header * tag 'm68knommu-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: Avoid CONFIG_COLDFIRE switch in uapi header
…git/s390/linux Pull more s390 updates from Alexander Gordeev: - Switch read and write software bits for PUDs - Add missing hardware bits for PUDs and PMDs - Generate unwind information for C modules to fix GDB unwind error for vDSO functions - Create .build-id links for unstripped vDSO files to enable vDSO debugging with symbols - Use standard stack frame layout for vDSO generated stack frames to manually walk stack frames without DWARF information - Rework perf_callchain_user() and arch_stack_walk_user() functions to reduce code duplication - Skip first stack frame when walking user stack - Add basic checks to identify invalid instruction pointers when walking stack frames - Introduce and use struct stack_frame_vdso_wrapper within vDSO user wrapper code to automatically generate an asm-offset define. Also use STACK_FRAME_USER_OVERHEAD instead of STACK_FRAME_OVERHEAD to document that the code works with user space stack - Clear the backchain of the extra stack frame added by the vDSO user wrapper code. This allows the user stack walker to detect and skip the non-standard stack frame. Without this an incorrect instruction pointer would be added to stack traces. - Rewrite psw_idle() function in C to ease maintenance and further enhancements - Remove get_vtimer() function and use get_cpu_timer() instead - Mark psw variable in __load_psw_mask() as __unitialized to avoid superfluous clearing of PSW - Remove obsolete and superfluous comment about removed TIF_FPU flag - Replace memzero_explicit() and kfree() with kfree_sensitive() to fix warnings reported by Coccinelle - Wipe sensitive data and all copies of protected- or secure-keys from stack when an IOCTL fails - Both do_airq_interrupt() and do_io_interrupt() functions set CIF_NOHZ_DELAY flag. Move it in do_io_irq() to simplify the code - Provide iucv_alloc_device() and iucv_release_device() helpers, which can be used to deduplicate more or less identical IUCV device allocation and release code in four different drivers - Make use of iucv_alloc_device() and iucv_release_device() helpers to get rid of quite some code and also remove a cast to an incompatible function (clang W=1) - There is no user of iucv_root outside of the core IUCV code left. Therefore remove the EXPORT_SYMBOL - __apply_alternatives() contains a runtime check which verifies that the size of the to be patched code area is even. Convert this to a compile time check - Increase size of buffers for sending z/VM CP DIAGNOSE X'008' commands from 128 to 240 - Do not accept z/VM CP DIAGNOSE X'008' commands longer than maximally allowed - Use correct defines IPL_BP_NVME_LEN and IPL_BP0_NVME_LEN instead of IPL_BP_FCP_LEN and IPL_BP0_FCP_LEN ones to initialize NVMe reIPL block on 'scp_data' sysfs attribute update - Initialize the correct fields of the NVMe dump block, which were confused with FCP fields - Refactor macros for 'scp_data' (re-)IPL sysfs attribute to reduce code duplication - Introduce 'scp_data' sysfs attribute for dump IPL to allow tools such as dumpconf passing additional kernel command line parameters to a stand-alone dumper - Rework the CPACF query functions to use the correct RRE or RRF instruction formats and set instruction register fields correctly - Instead of calling BUG() at runtime force a link error during compile when a unsupported opcode is used with __cpacf_query() or __cpacf_check_opcode() functions - Fix a crash in ap_parse_bitmap_str() function on /sys/bus/ap/apmask or /sys/bus/ap/aqmask sysfs file update with a relative mask value - Fix "bindings complete" udev event which should be sent once all AP devices have been bound to device drivers and again when unbind/bind actions take place and all AP devices are bound again - Facility list alt_stfle_fac_list is nowhere used in the decompressor, therefore remove it there - Remove custom kprobes insn slot allocator in favour of the standard module_alloc() one, since kernel image and module areas are located within 4GB - Use kvcalloc() instead of kvmalloc_array() in zcrypt driver to avoid calling memset() with a large byte count and get rid of the sparse warning as result * tag 's390-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits) s390/zcrypt: Use kvcalloc() instead of kvmalloc_array() s390/kprobes: Remove custom insn slot allocator s390/boot: Remove alt_stfle_fac_list from decompressor s390/ap: Fix bind complete udev event sent after each AP bus scan s390/ap: Fix crash in AP internal function modify_bitmap() s390/cpacf: Make use of invalid opcode produce a link error s390/cpacf: Split and rework cpacf query functions s390/ipl: Introduce sysfs attribute 'scp_data' for dump ipl s390/ipl: Introduce macros for (re)ipl sysfs attribute 'scp_data' s390/ipl: Fix incorrect initialization of nvme dump block s390/ipl: Fix incorrect initialization of len fields in nvme reipl block s390/ipl: Do not accept z/VM CP diag X'008' cmds longer than max length s390/ipl: Fix size of vmcmd buffers for sending z/VM CP diag X'008' cmds s390/alternatives: Convert runtime sanity check into compile time check s390/iucv: Unexport iucv_root tty: hvc-iucv: Make use of iucv_alloc_device() s390/smsgiucv_app: Make use of iucv_alloc_device() s390/netiucv: Make use of iucv_alloc_device() s390/vmlogrdr: Make use of iucv_alloc_device() s390/iucv: Provide iucv_alloc_device() / iucv_release_device() ...
With the move to private task_work, SQPOLL neglected to also run the normal task_work, if any is pending. This will eventually get run, but we should run it with the private task_work to ensure that things like a final fput() is processed in a timely fashion. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/313824bc-799d-414f-96b7-e6de57c7e21d@gmail.com/ Reported-by: Andrew Udvare <audvare@gmail.com> Fixes: af5d68f ("io_uring/sqpoll: manage task_work privately") Tested-by: Christian Heusel <christian@heusel.eu> Tested-by: Andrew Udvare <audvare@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
…nel/git/viro/vfs Pull bdev flags update from Al Viro: "Compactifying bdev flags. We can easily have up to 24 flags with sane atomicity, _without_ pushing anything out of the first cacheline of struct block_device" * tag 'pull-bd_flags-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: bdev: move ->bd_make_it_fail to ->__bd_flags bdev: move ->bd_ro_warned to ->__bd_flags bdev: move ->bd_has_subit_bio to ->__bd_flags bdev: move ->bd_write_holder into ->__bd_flags bdev: move ->bd_read_only to ->__bd_flags bdev: infrastructure for flags wrapper for access to ->bd_partno Use bdev_is_paritition() instead of open-coding it
…t/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted commits that had missed the last merge window..."
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
remove call_{read,write}_iter() functions
do_dentry_open(): kill inode argument
kernel_file_open(): get rid of inode argument
get_file_rcu(): no need to check for NULL separately
fd_is_open(): move to fs/file.c
close_on_exec(): pass files_struct instead of fdtable
[Why] Commit: - commit 5aa1dfc ("drm/mst: Refactor the flow for payload allocation/removement") accidently overwrite the commit - commit 54d2174 ("drm: use mgr->dev in drm_dbg_kms in drm_dp_add_payload_part2") which cause regression. [How] Recover the original NULL fix and remove the unnecessary input parameter 'state' for drm_dp_add_payload_part2(). Fixes: 5aa1dfc ("drm/mst: Refactor the flow for payload allocation/removement") Reported-by: Leon Weiß <leon.weiss@ruhr-uni-bochum.de> Link: https://lore.kernel.org/r/38c253ea42072cc825dc969ac4e6b9b600371cc8.camel@ruhr-uni-bochum.de/ Cc: lyude@redhat.com Cc: imre.deak@intel.com Cc: stable@vger.kernel.org Cc: regressions@lists.linux.dev Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240307062957.2323620-1-Wayne.Lin@amd.com (cherry picked from commit 4545614c1d8da603e57b60dd66224d81b6ffc305)
Pull bitmap updates from Yury Norov: - topology_span_sane() optimization from Kyle Meyer - fns() rework from Kuan-Wei Chiu (used in cpumask_local_spread() and other places) - headers cleanup from Andy - add a MAINTAINERS record for bitops API * tag 'bitmap-for-6.10v2' of https://github.com/norov/linux: usercopy: Don't use "proxy" headers bitops: Move aligned_byte_mask() to wordpart.h MAINTAINERS: add BITOPS API record bitmap: relax find_nth_bit() limitation on return value lib: make test_bitops compilable into the kernel image bitops: Optimize fns() for improved performance lib/test_bitops: Add benchmark test for fns() Compiler Attributes: Add __always_used macro sched/topology: Optimize topology_span_sane() cpumask: Add for_each_cpu_from()
…/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
"General:
- Integrate the shellcheck utility with the build of perf to allow
catching shell problems early in areas such as 'perf test', 'perf
trace' scrape scripts, etc
- Add 'uretprobe' variant in the 'perf bench uprobe' tool
- Add script to run instances of 'perf script' in parallel
- Allow parsing tracepoint names that start with digits, such as
9p/9p_client_req, etc. Make sure 'perf test' tests it even on
systems where those tracepoints aren't available
- Add Kan Liang to MAINTAINERS as a perf tools reviewer
- Add support for using the 'capstone' disassembler library in
various tools, such as 'perf script' and 'perf annotate'. This is
an alternative for the use of the 'xed' and 'objdump' disassemblers
Data-type profiling improvements:
- Resolve types for a->b->c by backtracking the assignments until it
finds DWARF info for one of those members
- Support for global variables, keeping a cache to speed up lookups
- Handle the 'call' instruction, dealing with effects on registers
and handling its return when tracking register data types
- Handle x86's segment based addressing like %gs:0x28, to support
things like per CPU variables, the stack canary, etc
- Data-type profiling got big speedups when using capstone for
disassembling. The objdump outoput parsing method is left as a
fallback when capstone fails or isn't available. There are patches
posted for 6.11 that to use a LLVM disassembler
- Support event group display in the TUI when annotating types with
--data-type, for instance to show memory load and store events for
the data type fields
- Optimize the 'perf annotate' data structures, reducing memory usage
- Add a initial 'perf test' for 'perf annotate', checking that a
target symbol appears on the output, specifying objdump via the
command line, etc
Vendor Events:
- Update Intel JSON files for Cascade Lake X, Emerald Rapids, Grand
Ridge, Ice Lake X, Lunar Lake, Meteor Lake, Sapphire Rapids, Sierra
Forest, Sky Lake X, Sky Lake and Snow Ridge X. Remove info metrics
erroneously in TopdownL1
- Add AMD's Zen 5 core and uncore events and metrics. Those come from
the "Performance Monitor Counters for AMD Family 1Ah Model 00h- 0Fh
Processors" document, with events that capture information on op
dispatch, execution and retirement, branch prediction, L1 and L2
cache activity, TLB activity, etc
- Mark L1D_CACHE_INVAL impacted by errata for ARM64's AmpereOne/
AmpereOneX
Miscellaneous:
- Sync header copies with the kernel sources
- Move some header copies used only for generating translation string
tables for ioctl cmds and other syscall integer arguments to a new
directory under tools/perf/beauty/, to separate from copies in
tools/include/ that are used to build the tools
- Introduce scrape script for several syscall 'flags'/'mask'
arguments
- Improve cpumap utilization, fixing up pairing of refcounts, using
the right iterators (perf_cpu_map__for_each_cpu), etc
- Give more details about raw event encodings in 'perf list', show
tracepoint encoding in the detailed output
- Refactor the DSOs handling code, reducing memory usage
- Document the BPF event modifier and add a 'perf test' for it
- Improve the event parser, better error messages and add further
'perf test's for it
- Add reference count checking to 'struct comm_str' and 'struct
mem_info'
- Make ARM64's 'perf test' entries for the Neoverse N1 more robust
- Tweak the ARM64's Coresight 'perf test's
- Improve ARM64's CoreSight ETM version detection and error reporting
- Fix handling of symbols when using kcore
- Fix PAI (Processor Activity Instrumentation) counter names for s390
virtual machines in 'perf report'
- Fix -g/--call-graph option failure in 'perf sched timehist'
- Add LIBTRACEEVENT_DIR build option to allow building with
libtraceevent installed in non-standard directories, such as when
doing cross builds
- Various 'perf test' and 'perf bench' fixes
- Improve 'perf probe' error message for long C++ probe names"
* tag 'perf-tools-for-v6.10-1-2024-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (260 commits)
tools lib subcmd: Show parent options in help
perf pmu: Count sys and cpuid JSON events separately
perf stat: Don't display metric header for non-leader uncore events
perf annotate-data: Ensure the number of type histograms
perf annotate: Fix segfault on sample histogram
perf daemon: Fix file leak in daemon_session__control
libsubcmd: Fix parse-options memory leak
perf lock: Avoid memory leaks from strdup()
perf sched: Rename 'switches' column header to 'count' and add usage description, options for latency
perf tools: Ignore deleted cgroups
perf parse: Allow tracepoint names to start with digits
perf parse-events: Add new 'fake_tp' parameter for tests
perf parse-events: pass parse_state to add_tracepoint
perf symbols: Fix ownership of string in dso__load_vmlinux()
perf symbols: Update kcore map before merging in remaining symbols
perf maps: Re-use __maps__free_maps_by_name()
perf symbols: Remove map from list before updating addresses
perf tracepoint: Don't scan all tracepoints to test if one exists
perf dwarf-aux: Fix build with HAVE_DWARF_CFI_SUPPORT
perf thread: Fixes to thread__new() related to initializing comm
...
Adjust the following code documentation: * Kernel-doc comments for ring_buffer_read_prepare() and ring_buffer_read_finish() mention that recording to the ring buffer is disabled when the read is active. Remove mention of this restriction because it was already lifted in commit 1039221 ("ring-buffer: Do not disable recording when there is an iterator"). * Function ring_buffer_read_finish() performs a self-check of the ring-buffer by locking cpu_buffer->reader_lock and then calling rb_check_pages(). The preceding comment explains that the lock is needed because rb_check_pages() clears the HEAD flag required by readers which might be running in parallel. Remove this explanation because commit 8843e06 ("ring-buffer: Handle race between rb_move_tail and rb_check_pages") simplified the function so it no longer resets the mentioned flag. Nonetheless, the lock is still needed because a reader swapping a page into the ring buffer can make the underlying doubly-linked list temporarily inconsistent. This is a non-functional change. Link: https://lore.kernel.org/linux-trace-kernel/20240517134008.24529-2-petr.pavlu@suse.com Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The reader code in rb_get_reader_page() swaps a new reader page into the ring buffer by doing cmpxchg on old->list.prev->next to point it to the new page. Following that, if the operation is successful, old->list.next->prev gets updated too. This means the underlying doubly-linked list is temporarily inconsistent, page->prev->next or page->next->prev might not be equal back to page for some page in the ring buffer. The resize operation in ring_buffer_resize() can be invoked in parallel. It calls rb_check_pages() which can detect the described inconsistency and stop further tracing: [ 190.271762] ------------[ cut here ]------------ [ 190.271771] WARNING: CPU: 1 PID: 6186 at kernel/trace/ring_buffer.c:1467 rb_check_pages.isra.0+0x6a/0xa0 [ 190.271789] Modules linked in: [...] [ 190.271991] Unloaded tainted modules: intel_uncore_frequency(E):1 skx_edac(E):1 [ 190.272002] CPU: 1 PID: 6186 Comm: cmd.sh Kdump: loaded Tainted: G E 6.9.0-rc6-default #5 158d3e1e6d0b091c34c3b96bfd99a1c58306d79f [ 190.272011] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552c-rebuilt.opensuse.org 04/01/2014 [ 190.272015] RIP: 0010:rb_check_pages.isra.0+0x6a/0xa0 [ 190.272023] Code: [...] [ 190.272028] RSP: 0018:ffff9c37463abb70 EFLAGS: 00010206 [ 190.272034] RAX: ffff8eba04b6cb80 RBX: 0000000000000007 RCX: ffff8eba01f13d80 [ 190.272038] RDX: ffff8eba01f130c0 RSI: ffff8eba04b6cd00 RDI: ffff8eba0004c700 [ 190.272042] RBP: ffff8eba0004c700 R08: 0000000000010002 R09: 0000000000000000 [ 190.272045] R10: 00000000ffff7f52 R11: ffff8eba7f600000 R12: ffff8eba0004c720 [ 190.272049] R13: ffff8eba00223a00 R14: 0000000000000008 R15: ffff8eba067a8000 [ 190.272053] FS: 00007f1bd64752c0(0000) GS:ffff8eba7f680000(0000) knlGS:0000000000000000 [ 190.272057] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 190.272061] CR2: 00007f1bd6662590 CR3: 000000010291e001 CR4: 0000000000370ef0 [ 190.272070] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 190.272073] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 190.272077] Call Trace: [ 190.272098] <TASK> [ 190.272189] ring_buffer_resize+0x2ab/0x460 [ 190.272199] __tracing_resize_ring_buffer.part.0+0x23/0xa0 [ 190.272206] tracing_resize_ring_buffer+0x65/0x90 [ 190.272216] tracing_entries_write+0x74/0xc0 [ 190.272225] vfs_write+0xf5/0x420 [ 190.272248] ksys_write+0x67/0xe0 [ 190.272256] do_syscall_64+0x82/0x170 [ 190.272363] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 190.272373] RIP: 0033:0x7f1bd657d263 [ 190.272381] Code: [...] [ 190.272385] RSP: 002b:00007ffe72b643f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 190.272391] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f1bd657d263 [ 190.272395] RDX: 0000000000000002 RSI: 0000555a6eb538e0 RDI: 0000000000000001 [ 190.272398] RBP: 0000555a6eb538e0 R08: 000000000000000a R09: 0000000000000000 [ 190.272401] R10: 0000555a6eb55190 R11: 0000000000000246 R12: 00007f1bd6662500 [ 190.272404] R13: 0000000000000002 R14: 00007f1bd6667c00 R15: 0000000000000002 [ 190.272412] </TASK> [ 190.272414] ---[ end trace 0000000000000000 ]--- Note that ring_buffer_resize() calls rb_check_pages() only if the parent trace_buffer has recording disabled. Recent commit d78ab79 ("tracing: Stop current tracer when resizing buffer") causes that it is now always the case which makes it more likely to experience this issue. The window to hit this race is nonetheless very small. To help reproducing it, one can add a delay loop in rb_get_reader_page(): ret = rb_head_page_replace(reader, cpu_buffer->reader_page); if (!ret) goto spin; for (unsigned i = 0; i < 1U << 26; i++) /* inserted delay loop */ __asm__ __volatile__ ("" : : : "memory"); rb_list_head(reader->list.next)->prev = &cpu_buffer->reader_page->list; .. and then run the following commands on the target system: echo 1 > /sys/kernel/tracing/events/sched/sched_switch/enable while true; do echo 16 > /sys/kernel/tracing/buffer_size_kb; sleep 0.1 echo 8 > /sys/kernel/tracing/buffer_size_kb; sleep 0.1 done & while true; do for i in /sys/kernel/tracing/per_cpu/*; do timeout 0.1 cat $i/trace_pipe; sleep 0.2 done done To fix the problem, make sure ring_buffer_resize() doesn't invoke rb_check_pages() concurrently with a reader operating on the same ring_buffer_per_cpu by taking its cpu_buffer->reader_lock. Link: https://lore.kernel.org/linux-trace-kernel/20240517134008.24529-3-petr.pavlu@suse.com Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: 659f451 ("ring-buffer: Add integrity check at end of iter read") Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> [ Fixed whitespace ] Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Fix the 'make W=1' warning: WARNING: modpost: missing MODULE_DESCRIPTION() in kernel/trace/preemptirq_delay_test.o Link: https://lore.kernel.org/linux-trace-kernel/20240518-md-preemptirq_delay_test-v1-1-387d11b30d85@quicinc.com Cc: stable@vger.kernel.org Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: f96e857 ("lib: Add module for testing preemptoff/irqsoff latency tracers") Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The patch updates the function documentation comment for rv_en(dis)able_monitor to adhere to the kernel-doc specification. Link: https://lore.kernel.org/linux-trace-kernel/20240520054239.61784-1-yang.lee@linux.alibaba.com Fixes: 102227b ("rv: Add Runtime Verification (RV) interface") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
…top.org/drm/misc/kernel into drm-next drm-misc-next-fixes for v6.10-rc1: - VM_BIND fix for nouveau. - Lots of panthor fixes: * Fixes for panthor's heap logical block. * Reset on unrecoverable fault * Fix VM references. * Reset fix. - xlnx compile and doc fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/54d2c8b9-8b04-45fc-b483-200ffac9d344@linux.intel.com
With the following two conditions, bio will be lost:
1) blk plug is not enabled, for example, __blkdev_direct_IO_simple() and
__blkdev_direct_IO_async();
2) bio plug is enabled, for example write IO for raid1/raid10 while
bitmap is enabled;
Root cause is that blk_finish_plug() will add the bio to
curent->bio_list, while such bio will not be handled:
__submit_bio_noacct
current->bio_list = bio_list_on_stack;
blk_start_plug
do {
dm_submit_bio
md_handle_request
raid10_write_request
-> generate new bio for underlying disks
raid1_add_bio_to_plug -> bio is added to plug
} while ((bio = bio_list_pop(&bio_list_on_stack[0])))
-> previous bio are all handled
blk_finish_plug
raid10_unplug
raid1_submit_write
submit_bio_noacct
if (current->bio_list)
bio_list_add(¤t->bio_list[0], bio)
-> add new bio
current->bio_list = NULL
-> new bio is lost
Fix the problem by moving the plug into the while loop, so that
current->bio_list will still be handled after blk_finish_plug().
By the way, enable plug for raid1/raid10 in this case will also prevent
delay IO handling into daemon thread, which should also improve IO
performance.
Fixes: 060406c ("block: add plug while submitting IO")
Reported-by: Changhui Zhong <czhong@redhat.com>
Closes: https://lore.kernel.org/all/CAGVVp+Xsmzy2G9YuEatfMT6qv1M--YdOCQ0g7z7OVmcTbBxQAg@mail.gmail.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Tested-by: Changhui Zhong <czhong@redhat.com>
Link: https://lore.kernel.org/r/20240521200308.983986-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lan966x is adding ptp traps to redirect the ptp frames to the CPU such that the HW will not forward these frames anywhere. The issue is that in case ptp is not enabled and the timestamping source is et to HWTSTAMP_SOURCE_NETDEV then these traps would not be removed on the error path. Fix this by removing the traps in this case as they are not needed. Fixes: 54e1ed6 ("net: lan966x: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()") Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20240517135808.3025435-1-horatiu.vultur@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The commit 81033c6 ("ALSA: core: Warn on empty module") introduced a WARN_ON() for a NULL module pointer passed at snd_card object creation, and it also wraps the code around it with '#ifdef MODULE'. This works in most cases, but the devils are always in details. "MODULE" is defined when the target code (i.e. the sound core) is built as a module; but this doesn't mean that the caller is also built-in or not. Namely, when only the sound core is built-in (CONFIG_SND=y) while the driver is a module (CONFIG_SND_USB_AUDIO=m), the passed module pointer is ignored even if it's non-NULL, and card->module remains as NULL. This would result in the missing module reference up/down at the device open/close, leading to a race with the code execution after the module removal. For addressing the bug, move the assignment of card->module again out of ifdef. The WARN_ON() is still wrapped with ifdef because the module can be really NULL when all sound drivers are built-in. Note that we keep 'ifdef MODULE' for WARN_ON(), otherwise it would lead to a false-positive NULL module check. Admittedly it won't catch perfectly, i.e. no check is performed when CONFIG_SND=y. But, it's no real problem as it's only for debugging, and the condition is pretty rare. Fixes: 81033c6 ("ALSA: core: Warn on empty module") Reported-by: Xu Yang <xu.yang_2@nxp.com> Closes: https://lore.kernel.org/r/20240520170349.2417900-1-xu.yang_2@nxp.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Tested-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20240522070442.17786-1-tiwai@suse.de
…linux/kernel/git/rw/ubifs Pull jffs2 updates from Richard Weinberger: - Fix illegal memory access in jffs2_free_inode() - Kernel-doc fixes - print symbolic error names * tag 'jffs2-for-linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: jffs2: Fix potential illegal address access in jffs2_free_inode jffs2: Simplify the allocation of slab caches jffs2: nodemgmt: fix kernel-doc comments jffs2: print symbolic error name instead of error code
…/git/i3c/linux Pull i3c updates from Alexandre Belloni: "Runtime PM (power management) is improved and hot-join support has been added to the dw controller driver. Core: - Allow device driver to trigger controller runtime PM Drivers: - dw: hot-join support - svc: better IBI handling" * tag 'i3c/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: dw: Add hot-join support. i3c: master: Enable runtime PM for master controller i3c: master: svc: fix invalidate IBI type and miss call client IBI handler i3c: master: svc: change ENXIO to EAGAIN when IBI occurs during start frame i3c: Add comment for -EAGAIN in i3c_device_do_priv_xfers()
…/abelloni/linux Pull RTC updates from Alexandre Belloni: "There is one new driver and then most of the changes are the device tree bindings conversions to yaml. New driver: - Epson RX8111 Drivers: - Many Device Tree bindings conversions to dtschema - pcf8563: wakeup-source support" * tag 'rtc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: pcf8563: add wakeup-source support rtc: rx8111: handle VLOW flag rtc: rx8111: demote warnings to debug level rtc: rx6110: Constify struct regmap_config dt-bindings: rtc: convert trivial devices into dtschema dt-bindings: rtc: stmp3xxx-rtc: convert to dtschema dt-bindings: rtc: pxa-rtc: convert to dtschema rtc: Add driver for Epson RX8111 dt-bindings: rtc: Add Epson RX8111 rtc: mcp795: drop unneeded MODULE_ALIAS rtc: nuvoton: Modify part number value rtc: test: Split rtc unit test into slow and normal speed test dt-bindings: rtc: nxp,lpc1788-rtc: convert to dtschema dt-bindings: rtc: digicolor-rtc: move to trivial-rtc dt-bindings: rtc: alphascale,asm9260-rtc: convert to dtschema dt-bindings: rtc: armada-380-rtc: convert to dtschema rtc: cros-ec: provide ID table for avoiding fallback match
Pull smb server fixes from Steve French: "Two ksmbd server fixes, both for stable" * tag '6.10-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: ignore trailing slashes in share paths ksmbd: avoid to send duplicate oplock break notifications
…up/linux-ntfs3 Pull ntfs3 updates from Konstantin Komarov: "Fixes: - reusing of the file index (could cause the file to be trimmed) - infinite dir enumeration - taking DOS names into account during link counting - le32_to_cpu conversion, 32 bit overflow, NULL check - some code was refactored Changes: - removed max link count info display during driver init Remove: - atomic_open has been removed for lack of use" * tag 'ntfs3_for_6.10' of https://github.com/Paragon-Software-Group/linux-ntfs3: fs/ntfs3: Break dir enumeration if directory contents error fs/ntfs3: Fix case when index is reused during tree transformation fs/ntfs3: Mark volume as dirty if xattr is broken fs/ntfs3: Always make file nonresident on fallocate call fs/ntfs3: Redesign ntfs_create_inode to return error code instead of inode fs/ntfs3: Use variable length array instead of fixed size fs/ntfs3: Use 64 bit variable to avoid 32 bit overflow fs/ntfs3: Check 'folio' pointer for NULL fs/ntfs3: Missed le32_to_cpu conversion fs/ntfs3: Remove max link count info display during driver init fs/ntfs3: Taking DOS names into account during link counting fs/ntfs3: remove atomic_open fs/ntfs3: use kcalloc() instead of kzalloc()
Pull ceph updates from Ilya Dryomov: "A series from Xiubo that adds support for additional access checks based on MDS auth caps which were recently made available to clients. This is needed to prevent scenarios where the MDS quietly discards updates that a UID-restricted client previously (wrongfully) acked to the user. Other than that, just a documentation fixup" * tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-client: doc: ceph: update userspace command to get CephFS metadata ceph: add CEPHFS_FEATURE_MDS_AUTH_CAPS_CHECK feature bit ceph: check the cephx mds auth access for async dirop ceph: check the cephx mds auth access for open ceph: check the cephx mds auth access for setattr ceph: add ceph_mds_check_access() helper ceph: save cap_auths in MDS client when session is opened
Pull ipmi updates from Corey Minyard: "Mostly updates for deprecated interfaces, platform.remove and converting from a tasklet to a BH workqueue. Also use HAS_IOPORT for disabling inb()/outb()" * tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmi: ipmi: kcs_bmc_npcm7xx: Convert to platform remove callback returning void ipmi: kcs_bmc_aspeed: Convert to platform remove callback returning void ipmi: ipmi_ssif: Convert to platform remove callback returning void ipmi: ipmi_si_platform: Convert to platform remove callback returning void ipmi: ipmi_powernv: Convert to platform remove callback returning void ipmi: bt-bmc: Convert to platform remove callback returning void char: ipmi: handle HAS_IOPORT dependencies ipmi: Convert from tasklet to BH workqueue
…ux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: - Fix regressions of the new x86 CPU VFM (vendor/family/model) enumeration/matching code - Fix crash kernel detection on buggy firmware with non-compliant ACPI MADT tables - Address Kconfig warning * tag 'x86-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Fix x86_match_cpu() to match just X86_VENDOR_INTEL crypto: x86/aes-xts - switch to new Intel CPU model defines x86/topology: Handle bogus ACPI tables correctly x86/kconfig: Select ARCH_WANT_FRAME_POINTERS again when UNWINDER_FRAME_POINTER=y
…ux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: - Fix x86 IRQ vector leak caused by a CPU offlining race - Fix build failure in the riscv-imsic irqchip driver caused by an API-change semantic conflict - Fix use-after-free in irq_find_at_or_after() * tag 'irq-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after() genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline irqchip/riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict
…rg/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "16 hotfixes, 11 of which are cc:stable. A few nilfs2 fixes, the remainder are for MM: a couple of selftests fixes, various singletons fixing various issues in various parts" * tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/ksm: fix possible UAF of stable_node mm/memory-failure: fix handling of dissolved but not taken off from buddy pages mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again nilfs2: fix potential hang in nilfs_detach_log_writer() nilfs2: fix unexpected freezing of nilfs_segctor_sync() nilfs2: fix use-after-free of timer for log writer thread selftests/mm: fix build warnings on ppc64 arm64: patching: fix handling of execmem addresses selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages selftests/mm: compaction_test: fix bogus test success on Aarch64 mailmap: update email address for Satya Priya mm/huge_memory: don't unpoison huge_zero_folio kasan, fortify: properly rename memintrinsics lib: add version into /proc/allocinfo output mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL
…ifs-2.6 Pull smb client fixes from Steve French: - two important netfs integration fixes - including for a data corruption and also fixes for multiple xfstests - reenable swap support over SMB3 * tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix missing set of remote_i_size cifs: Fix smb3_insert_range() to move the zero_point cifs: update internal version number smb3: reenable swapfiles over SMB3 mounts
…acy" This reverts commit 617824a. This made a simple 'perf record -e cycles:pp make -j199' stop working on the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed at length in the threads in the Link tags below. The fix provided by Ian wasn't acceptable and work to fix this will take time we don't have at this point, so lets revert this and work on it on the next devel cycle. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com> Cc: Ethan Adams <j.ethan.adams@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Tycho Andersen <tycho@tycho.pizza> Cc: Yang Jihong <yangjihong@bytedance.com> Link: https://lore.kernel.org/lkml/CAHk-=wi5Ri=yR2jBVk-4HzTzpoAWOgstr1LEvg_-OXtJvXXJOA@mail.gmail.com Link: https://lore.kernel.org/lkml/CAHk-=wiWvtFyedDNpoV7a8Fq_FpbB+F5KmWK2xPY3QoYseOf_A@mail.gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
…el.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tool fix from Arnaldo Carvalho de Melo: "Revert a patch causing a regression. This made a simple 'perf record -e cycles:pp make -j199' stop working on the Ampere ARM64 system Linus uses to test ARM64 kernels". * tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"
percpu.h depends on smp.h, but doesn't include it directly because of circular header dependency issues; percpu.h is needed in a bunch of low level headers. This fixes a randconfig build error on mips: include/linux/alloc_tag.h: In function '__alloc_tag_ref_set': include/asm-generic/percpu.h:31:40: error: implicit declaration of function 'raw_smp_processor_id' [-Werror=implicit-function-declaration] Reported-by: kernel test robot <lkp@intel.com> Fixes: 24e44cc ("mm: percpu: enable per-cpu allocation tagging") Closes: https://lore.kernel.org/oe-kbuild-all/202405210052.DIrMXJNz-lkp@intel.com/ Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The card-specific debugfs entries are removed at the last stage of card free phase, and it's performed after synchronization of the closes of all opened fds. This works fine for most cases, but it can be potentially problematic for a hotplug device like USB-audio. Due to the nature of snd_card_free_when_closed(), the card free isn't called immediately after the driver removal for a hotplug device, but it's left until the last fd is closed. It implies that the card debugfs entries also remain. Meanwhile, when a new device is inserted before the last close and the very same card slot is assigned, the driver tries to create the card debugfs root again on the very same path. This conflicts with the remaining entry, and results in the kernel warning such as: debugfs: Directory 'card0' with parent 'sound' already present! with the missing debugfs entry afterwards. For avoiding such conflicts, remove debugfs entries at the device disconnection phase instead. The jack kctl debugfs entries get removed in snd_jack_dev_disconnect() instead of each kctl private_free. Fixes: 2d670ea ("ALSA: jack: implement software jack injection via debugfs") Link: https://lore.kernel.org/r/20240524151256.32521-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 2024 ASUS ROG G814J model is much the same as the 2023 model and the 2023 16" version. We can use the same Cirrus Amp quirk. Fixes: 811dd42 ("ALSA: hda/realtek: Add quirks for Asus ROG 2024 laptops using CS35L41") Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20240526091032.114545-1-luke@ljones.dev Signed-off-by: Takashi Iwai <tiwai@suse.de>
plbossart
marked this pull request as ready for review
May 29, 2024 17:46
plbossart
requested review from
bardliao,
dbaluta,
kv2019i,
lgirdwood,
ranj063 and
ujfalusi
as code owners
May 29, 2024 17:46
Closed
Collaborator
|
out of date GuC, i915 "Fence timeout" warnings and non-functional GUI found in https://sof-ci.01.org/linuxpr/PR5022/build3211/devicetest/index.html?model=MTLP_RVP_HDA&testcase=verify-kernel-boot-log just like before in #5009 where they were discussed first. |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
here we go, first upstream merge of 6.10-rc1, the 6.11 cycle is open.