ASoC: codec: Fix IO timeout when doing jack detection

drivers/soundwire/intel.c

@@ -529,17 +529,24 @@ intel_pdi_alh_configure(struct sdw_intel *sdw, struct sdw_cdns_pdi *pdi)
 	intel_writel(alh, SDW_ALH_STRMZCFG(pdi->intel_alh_id), conf);
 }
 
-static int intel_config_stream(struct sdw_intel *sdw,
+static int intel_params_stream(struct sdw_intel *sdw,
 			       struct snd_pcm_substream *substream,
 			       struct snd_soc_dai *dai,
-			       struct snd_pcm_hw_params *hw_params, int link_id)
+			       struct snd_pcm_hw_params *hw_params,
+			       int link_id, int alh_stream_id)
 {
 	struct sdw_intel_link_res *res = sdw->res;
+	struct sdw_intel_stream_params_data params_data;
 
-	if (res->ops && res->ops->config_stream && res->arg)
-		return res->ops->config_stream(res->arg,
-				substream, dai, hw_params, link_id);
+	params_data.substream = substream;
+	params_data.dai = dai;
+	params_data.hw_params = hw_params;
+	params_data.link_id = link_id;
+	params_data.alh_stream_id = alh_stream_id;
 
+	if (res->ops && res->ops->params_stream && res->dev)
+		return res->ops->params_stream(res->dev,
+					       &params_data);
 	return -EIO;
 }
 
@@ -654,7 +661,8 @@ static int intel_hw_params(struct snd_pcm_substream *substream,
 
 
 	/* Inform DSP about PDI stream number */
-	ret = intel_config_stream(sdw, substream, dai, params,
+	ret = intel_params_stream(sdw, substream, dai, params,
+				  sdw->instance,
 				  pdi->intel_alh_id);
 	if (ret)
 		goto error;

drivers/soundwire/intel.h

@@ -5,23 +5,26 @@
 #define __SDW_INTEL_LOCAL_H
 
 /**
- * struct sdw_intel_link_res - Soundwire link resources
+ * struct sdw_intel_link_res - Soundwire Intel link resource structure,
+ * typically populated by the controller driver.
+ * @pdev: platform_device
+ * @mmio_base: mmio base of SoundWire registers
  * @registers: Link IO registers base
  * @shim: Audio shim pointer
  * @alh: ALH (Audio Link Hub) pointer
  * @irq: Interrupt line
  * @ops: Shim callback ops
- * @arg: Shim callback ops argument
- *
- * This is set as pdata for each link instance.
+ * @dev: device implementing hw_params and free callbacks
  */
 struct sdw_intel_link_res {
+	struct platform_device *pdev;
+	void __iomem *mmio_base; /* not strictly needed, useful for debug */
 	void __iomem *registers;
 	void __iomem *shim;
 	void __iomem *alh;
 	int irq;
 	const struct sdw_intel_ops *ops;
-	void *arg;
+	struct device *dev;
 };
 
 #endif /* __SDW_INTEL_LOCAL_H */

drivers/soundwire/intel_init.c

@@ -27,19 +27,9 @@ static int link_mask;
 module_param_named(sdw_link_mask, link_mask, int, 0444);
 MODULE_PARM_DESC(sdw_link_mask, "Intel link mask (one bit per link)");
 
-struct sdw_link_data {
-	struct sdw_intel_link_res res;
-	struct platform_device *pdev;
-};
-
-struct sdw_intel_ctx {
-	int count;
-	struct sdw_link_data *links;
-};
-
 static int sdw_intel_cleanup_pdev(struct sdw_intel_ctx *ctx)
 {
-	struct sdw_link_data *link = ctx->links;
+	struct sdw_intel_link_res *link = ctx->links;
 	int i;
 
 	if (!link)
@@ -62,7 +52,7 @@ static struct sdw_intel_ctx
 {
 	struct platform_device_info pdevinfo;
 	struct platform_device *pdev;
-	struct sdw_link_data *link;
+	struct sdw_intel_link_res *link;
 	struct sdw_intel_ctx *ctx;
 	struct acpi_device *adev;
 	int ret, i;
@@ -123,23 +113,20 @@ static struct sdw_intel_ctx
 			continue;
 		}
 
-		link->res.irq = res->irq;
-		link->res.registers = res->mmio_base + SDW_LINK_BASE
+		link->registers = res->mmio_base + SDW_LINK_BASE
 					+ (SDW_LINK_SIZE * i);
-		link->res.shim = res->mmio_base + SDW_SHIM_BASE;
-		link->res.alh = res->mmio_base + SDW_ALH_BASE;
+		link->shim = res->mmio_base + SDW_SHIM_BASE;
+		link->alh = res->mmio_base + SDW_ALH_BASE;
 
-		link->res.ops = res->ops;
-		link->res.arg = res->arg;
+		link->ops = res->ops;
+		link->dev = res->dev;
 
 		memset(&pdevinfo, 0, sizeof(pdevinfo));
 
 		pdevinfo.parent = res->parent;
 		pdevinfo.name = "int-sdw";
 		pdevinfo.id = i;
 		pdevinfo.fwnode = acpi_fwnode_handle(adev);
-		pdevinfo.data = &link->res;
-		pdevinfo.size_data = sizeof(link->res);
 
 		pdev = platform_device_register_full(&pdevinfo);
 		if (IS_ERR(pdev)) {
@@ -224,10 +211,8 @@ EXPORT_SYMBOL(sdw_intel_init);
  *
  * Delete the controller instances created and cleanup
  */
-void sdw_intel_exit(void *arg)
+void sdw_intel_exit(struct sdw_intel_ctx *ctx)
 {
-	struct sdw_intel_ctx *ctx = arg;
-
 	sdw_intel_cleanup_pdev(ctx);
 	kfree(ctx);
 }

include/linux/soundwire/sdw.h

@@ -547,6 +547,20 @@ struct sdw_slave_ops {
  * @node: node for bus list
  * @port_ready: Port ready completion flag for each Slave port
  * @dev_num: Device Number assigned by Bus
+ * @probed: boolean tracking driver state
+ * @probe_complete: completion utility to control potential races
+ * on startup between driver probe/initialization and SoundWire
+ * Slave state changes/implementation-defined interrupts
+ * @enumeration_complete: completion utility to control potential races
+ * on startup between device enumeration and read/write access to the
+ * Slave device
+ * @initialization_complete: completion utility to control potential races
+ * on startup between device enumeration and settings being restored
+ * @unattach_request: mask field to keep track why the Slave re-attached and
+ * was re-initialized. This is useful to deal with potential race conditions
+ * between the Master suspending and the codec resuming, and make sure that
+ * when the Master triggered a reset the Slave is properly enumerated and
+ * initialized
  */
 struct sdw_slave {
 	struct sdw_slave_id id;
@@ -561,6 +575,11 @@ struct sdw_slave {
 	struct list_head node;
 	struct completion *port_ready;
 	u16 dev_num;
+	bool probed;
+	struct completion probe_complete;
+	struct completion enumeration_complete;
+	struct completion initialization_complete;
+	u32 unattach_request;
 };
 
 #define dev_to_sdw_dev(_dev) container_of(_dev, struct sdw_slave, dev)

include/linux/soundwire/sdw_intel.h

@@ -4,36 +4,129 @@
 #ifndef __SDW_INTEL_H
 #define __SDW_INTEL_H
 
+/**
+ * struct sdw_intel_stream_params_data: configuration passed during
+ * the @params_stream callback, e.g. for interaction with DSP
+ * firmware.
+ */
+struct sdw_intel_stream_params_data {
+	struct snd_pcm_substream *substream;
+	struct snd_soc_dai *dai;
+	struct snd_pcm_hw_params *hw_params;
+	int link_id;
+	int alh_stream_id;
+};
+
+/**
+ * struct sdw_intel_stream_free_data: configuration passed during
+ * the @free_stream callback, e.g. for interaction with DSP
+ * firmware.
+ */
+struct sdw_intel_stream_free_data {
+	struct snd_pcm_substream *substream;
+	struct snd_soc_dai *dai;
+	int link_id;
+};
+
 /**
  * struct sdw_intel_ops: Intel audio driver callback ops
  *
- * @config_stream: configure the stream with the hw_params
- * the first argument containing the context is mandatory
  */
 struct sdw_intel_ops {
-	int (*config_stream)(void *arg, void *substream,
-			     void *dai, void *hw_params, int stream_num);
+	int (*params_stream)(struct device *dev,
+			     struct sdw_intel_stream_params_data *params_data);
+	int (*free_stream)(struct device *dev,
+			   struct sdw_intel_stream_free_data *free_data);
 };
 
 /**
- * struct sdw_intel_res - Soundwire Intel resource structure
+ * struct sdw_intel_acpi_info - Soundwire Intel information found in ACPI tables
+ * @handle: ACPI controller handle
+ * @count: link count found with "sdw-master-count" property
+ * @link_mask: bit-wise mask listing links enabled by BIOS menu
+ *
+ * this structure could be expanded to e.g. provide all the _ADR
+ * information in case the link_mask is not sufficient to identify
+ * platform capabilities.
+ */
+struct sdw_intel_acpi_info {
+	acpi_handle handle;
+	int count;
+	u32 link_mask;
+};
+
+struct sdw_intel_link_res;
+
+/**
+ * struct sdw_intel_ctx - context allocated by the controller
+ * driver probe
+ * @count: link count
+ * @mmio_base: mmio base of SoundWire registers, only used to check
+ * hardware capabilities after all power dependencies are settled.
+ * @link_mask: bit-wise mask listing SoundWire links reported by the
+ * Controller
+ * @handle: ACPI parent handle
+ * @links: information for each link (controller-specific and kept
+ * opaque here)
+ */
+struct sdw_intel_ctx {
+	int count;
+	void __iomem *mmio_base;
+	u32 link_mask;
+	acpi_handle handle;
+	struct sdw_intel_link_res *links;
+};
+
+/**
+ * struct sdw_intel_res - Soundwire Intel global resource structure,
+ * typically populated by the DSP driver
+ *
+ * @count: link count
  * @mmio_base: mmio base of SoundWire registers
  * @irq: interrupt number
  * @handle: ACPI parent handle
  * @parent: parent device
  * @ops: callback ops
- * @arg: callback arg
+ * @dev: device implementing hwparams and free callbacks
+ * @link_mask: bit-wise mask listing links selected by the DSP driver
+ * This mask may be a subset of the one reported by the controller since
+ * machine-specific quirks are handled in the DSP driver.
  */
 struct sdw_intel_res {
+	int count;
 	void __iomem *mmio_base;
 	int irq;
 	acpi_handle handle;
 	struct device *parent;
 	const struct sdw_intel_ops *ops;
-	void *arg;
+	struct device *dev;
+	u32 link_mask;
 };
 
-void *sdw_intel_init(acpi_handle *parent_handle, struct sdw_intel_res *res);
-void sdw_intel_exit(void *arg);
+/*
+ * On Intel platforms, the SoundWire IP has dependencies on power
+ * rails shared with the DSP, and the initialization steps are split
+ * in three. First an ACPI scan to check what the firmware describes
+ * in DSDT tables, then an allocation step (with no hardware
+ * configuration but with all the relevant devices created) and last
+ * the actual hardware configuration. The final stage is a global
+ * interrupt enable which is controlled by the DSP driver. Splitting
+ * these phases helps simplify the boot flow and make early decisions
+ * on e.g. which machine driver to select (I2S mode, HDaudio or
+ * SoundWire).
+ */
+int sdw_intel_acpi_scan(acpi_handle *parent_handle,
+			struct sdw_intel_acpi_info *info);
+
+struct sdw_intel_ctx *
+sdw_intel_probe(struct sdw_intel_res *res);
+
+int sdw_intel_startup(struct sdw_intel_ctx *ctx);
+
+void sdw_intel_exit(struct sdw_intel_ctx *ctx);
+
+void sdw_intel_enable_irq(void __iomem *mmio_base, bool enable);
+
+irqreturn_t sdw_intel_thread(int irq, void *dev_id);
 
 #endif

sound/soc/codecs/Kconfig

@@ -1057,6 +1057,45 @@ config SND_SOC_RT5677_SPI
 config SND_SOC_RT5682
 	tristate
 
+config SND_SOC_RT5682_SDW
+	tristate "Realtek RT5682 Codec - SDW"
+	depends on SOUNDWIRE
+	select SND_SOC_RT5682
+	select REGMAP_SOUNDWIRE
+
+config SND_SOC_RT700
+	tristate
+
+config SND_SOC_RT700_SDW
+	tristate "Realtek RT700 Codec - SDW"
+	depends on SOUNDWIRE
+	select SND_SOC_RT700
+	select REGMAP_SOUNDWIRE
+
+config SND_SOC_RT1308_SDW
+	tristate "Realtek RT1308 Codec - SDW"
+	depends on SOUNDWIRE
+	select SND_SOC_RT1308
+	select REGMAP_SOUNDWIRE
+
+config SND_SOC_RT711
+	tristate
+
+config SND_SOC_RT711_SDW
+	tristate "Realtek RT711 Codec - SDW"
+	depends on SOUNDWIRE
+	select SND_SOC_RT711
+	select REGMAP_SOUNDWIRE
+
+config SND_SOC_RT715
+	tristate
+
+config SND_SOC_RT715_SDW
+	tristate "Realtek RT715 Codec - SDW"
+	depends on SOUNDWIRE
+	select SND_SOC_RT715
+	select REGMAP_SOUNDWIRE
+
 #Freescale sgtl5000 codec
 config SND_SOC_SGTL5000
 	tristate "Freescale SGTL5000 CODEC"