Skip to content

[ICL][BUG]HDMI has no sound output after wake up from s3 during HDMI playback #1080

New issue
New issue
Closed
Closed
[ICL][BUG]HDMI has no sound output after wake up from s3 during HDMI playback#1080
Assignees
kv2019i
Labels
HDAApplies to HD-Audio bus for codec connectionICLApplies to Icelake platformP2Critical bugs or normal featuresbugSomething isn't workingreuse legacy HDMI codecReuse legacy HDA HDMI codec driver snd-hda-codec-hdmi

Description

@YvonneYang2
YvonneYang2
opened on Jul 5, 2019

Describe the bug
HDMI output no sound after wake up from s3 during HDMI playback. Besides, waking up from s3 was very slow.

To Reproduce

1.Connect HDMI external, and adjust alsamixer pin6-port0 to cvt3
2.Play HDMI music(aplay -Dhw:0,3 -f dat 1.wav -vv -i)
3.Enter S3 then wake up

frequency

100%

Expected result
HDMI keep playing after wake up from s3

Actual result
Wake up from s3 very slowly and HDMI output no sound after s3 while console shows music is still playing.

Environment
Firmware: fcd72767 https://github.com/thesofproject/sof/commits/master
Kernel: 86b820f https://github.com/thesofproject/linux/commits/topic/sof-dev
Topology: file: tools/topology/sof-hda-generic-2ch.tplg same as firmware
platform： icl-rvp

dmesg

[  204.850722] sof-audio-pci 0000:00:1f.3: ipc tx: 0x40020000: GLB_PM_MSG: CTX_RESTORE
[  204.850978] sof-audio-pci 0000:00:1f.3: ipc tx succeeded: 0x40020000: GLB_PM_MSG: CTX_RESTORE
[  204.866722] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[  204.876602] nvme nvme0: 8/0/0 default/read/poll queues
[  204.947069] ata3: SATA link down (SStatus 4 SControl 300)
[  205.242972] atkbd serio0: Failed to enable keyboard on isa0060/serio0
[  205.350026] sof-audio-pci 0000:00:1f.3: ipc rx: 0x90020000: GLB_TRACE_MSG
[  205.350063] sof-audio-pci 0000:00:1f.3: ipc rx done: 0x90020000: GLB_TRACE_MSG
[  205.850030] sof-audio-pci 0000:00:1f.3: ipc rx: 0x90020000: GLB_TRACE_MSG
[  205.850068] sof-audio-pci 0000:00:1f.3: ipc rx done: 0x90020000: GLB_TRACE_MSG
[  206.578472] e1000e: enp0s31f6 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[  206.578475] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[  207.858991] HDMI HDA Codec ehdaudio0D2: hdac_hdmi_present_sense: disconnect for pin:port 4:0
[  207.858995] HDMI HDA Codec ehdaudio0D2: hdac_hdmi_present_sense: disconnect for pin:port 6:0
[  207.859030] HDMI HDA Codec ehdaudio0D2: hdac_hdmi_present_sense: disconnect for pin:port 8:0
[  207.859033] HDMI HDA Codec ehdaudio0D2: hdac_hdmi_present_sense: disconnect for pin:port 10:0
[  207.859035] HDMI HDA Codec ehdaudio0D2: hdac_hdmi_present_sense: disconnect for pin:port 11:0
[  208.053484] sdhci-pci 0000:00:14.5: SDHCI controller found [8086:34f8] (rev 30)
[  208.054765] OOM killer enabled.
[  208.054767] Restarting tasks ... 
[  208.056626] sof-audio-pci 0000:00:1f.3: hda: prepare stream dir 0
[  208.056636] sof-audio-pci 0000:00:1f.3: ipc tx: 0x80010000: GLB_DAI_MSG: CONFIG
[  208.056759] done.
[  208.057018] sof-audio-pci 0000:00:1f.3: ipc tx succeeded: 0x80010000: GLB_DAI_MSG: CONFIG
[  208.057057] sof-audio-pci 0000:00:1f.3: format_val=49, rate=48000, ch=2, format=10
[  208.057100] sof-audio-pci 0000:00:1f.3: pcm: prepare stream 3 dir 0
[  208.057102] sof-audio-pci 0000:00:1f.3: pcm: hw params stream 3 dir 0
[  208.057116] sof-audio-pci 0000:00:1f.3: FW Poll Status: reg=0x40000 successful
[  208.057153] sof-audio-pci 0000:00:1f.3: FW Poll Status: reg=0x40000 successful
[  208.057158] sof-audio-pci 0000:00:1f.3: period_bytes:0x3fc0
[  208.057159] sof-audio-pci 0000:00:1f.3: periods:4
[  208.057220] sof-audio-pci 0000:00:1f.3: stream_tag 1
[  208.057224] sof-audio-pci 0000:00:1f.3: ipc tx: 0x60010000: GLB_STREAM_MSG: PCM_PARAMS
[  208.057449] sof-audio-pci 0000:00:1f.3: ipc tx succeeded: 0x60010000: GLB_STREAM_MSG: PCM_PARAMS
[  208.057451] sof-audio-pci 0000:00:1f.3: pcm: stream dir 0, posn mailbox offset is 790528
[  208.057586] sof-audio-pci 0000:00:1f.3: pcm: trigger stream 3 dir 0 cmd 1
[  208.057641] sof-audio-pci 0000:00:1f.3: FW Poll Status: reg=0x14001e successful
[  208.057642] sof-audio-pci 0000:00:1f.3: ipc tx: 0x60040000: GLB_STREAM_MSG: TRIG_START
[  208.057849] sof-audio-pci 0000:00:1f.3: ipc tx succeeded: 0x60040000: GLB_STREAM_MSG: TRIG_START
[  208.057856] sof-audio-pci 0000:00:1f.3: In hda_link_pcm_trigger cmd=1
[  208.101955] PM: suspend exit
[  208.299990] e1000e: enp0s31f6 NIC Link is Down
[  208.849715] sof-audio-pci 0000:00:1f.3: ipc rx: 0x90020000: GLB_TRACE_MSG
[  208.849768] sof-audio-pci 0000:00:1f.3: ipc rx done: 0x90020000: GLB_TRACE_MSG
[  210.045803] e1000e: enp0s31f6 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[  210.045810] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[  210.045960] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[  213.848772] HDMI HDA Codec ehdaudio0D2: No connections found for pin:port 6:0
[  226.241015] HDMI HDA Codec ehdaudio0D2: hdac_hdmi_present_sense: disconnect for pin:port 6:0
[  241.933970] HDMI HDA Codec ehdaudio0D2: No connections found for pin:port 6:0
[  271.991677] sof-audio-pci 0000:00:1f.3: pcm: trigger stream 3 dir 0 cmd 0
[  271.992230] sof-audio-pci 0000:00:1f.3: FW Poll Status: reg=0x20140000 successful
[  271.992248] sof-audio-pci 0000:00:1f.3: ipc tx: 0x60050000: GLB_STREAM_MSG: TRIG_STOP
[  271.992378] sof-audio-pci 0000:00:1f.3: ipc tx succeeded: 0x60050000: GLB_STREAM_MSG: TRIG_STOP
[  271.992388] sof-audio-pci 0000:00:1f.3: In hda_link_pcm_trigger cmd=0
[  271.992549] sof-audio-pci 0000:00:1f.3: pcm: free stream 3 dir 0
[  271.992557] sof-audio-pci 0000:00:1f.3: ipc tx: 0x60030000: GLB_STREAM_MSG: PCM_FREE
[  271.992709] sof-audio-pci 0000:00:1f.3: ipc tx succeeded: 0x60030000: GLB_STREAM_MSG: PCM_FREE
[  271.992730] sof-audio-pci 0000:00:1f.3: ipc tx: 0x80010000: GLB_DAI_MSG: CONFIG
[  271.992872] sof-audio-pci 0000:00:1f.3: ipc tx succeeded: 0x80010000: GLB_DAI_MSG: CONFIG
[  271.992926] sof-audio-pci 0000:00:1f.3: pcm: close stream 3 dir 0
[  272.850146] sof-audio-pci 0000:00:1f.3: ipc rx: 0x90020000: GLB_TRACE_MSG
[  272.850184] sof-audio-pci 0000:00:1f.3: ipc rx done: 0x90020000: GLB_TRACE_MSG
[  277.037556] sof-audio-pci 0000:00:1f.3: FW Poll Status: reg=0x20140000 successful
[  277.074047] sof-audio-pci 0000:00:1f.3: ipc tx: 0x40010000: GLB_PM_MSG: CTX_SAVE
[  277.074247] sof-audio-pci 0000:00:1f.3: ipc tx succeeded: 0x40010000: GLB_PM_MSG: CTX_SAVE
[  277.074356] sof-audio-pci 0000:00:1f.3: FW Poll Status: reg=0x1010f0f successful
[  277.074360] sof-audio-pci 0000:00:1f.3: FW Poll Status: reg=0x1000f0f successful
[  277.074363] sof-audio-pci 0000:00:1f.3: DSP core(s) enabled? 0 : core_mask f

hdmi_sound_dmesg.log
hdmi_sound_logger.log

Activity

  1. YvonneYang2
    added
    bugSomething isn't working
    ICLApplies to Icelake platform
    HDAApplies to HD-Audio bus for codec connection
    on Jul 5, 2019

  2. ClarexZhou commented on Aug 5, 2019

    @ClarexZhou
    ClarexZhou
    on Aug 5, 2019

    Error also seen on DP.
    linux (topic/sof-dev): 8b8f437
    sof (master): f837e57
    Platform: ICL HDA RVP

  3. kv2019i
    self-assigned this
    on Aug 8, 2019

  4. kv2019i commented on Aug 12, 2019

    @kv2019i
    kv2019i
    on Aug 12, 2019
    Collaborator

    In progress, see comments in #1104 (comment)
    I believe rootcause is the same in both bugs.

  5. mengdonglin
    added
    reuse legacy HDMI codecReuse legacy HDA HDMI codec driver snd-hda-codec-hdmi
    on Aug 26, 2019

  6. kv2019i commented on Sep 12, 2019

    @kv2019i
    kv2019i
    on Sep 12, 2019
    Collaborator

    #1123 now ready for testing (take #1155 and thesofproject/kconfig#15 to test), should fix this bug

  7. ClarexZhou commented on Sep 16, 2019

    @ClarexZhou
    ClarexZhou
    on Sep 16, 2019

    @kv2019i , thesofproject/kconfig#15 can't be applied as below.

    scripts/kconfig/conf  --alldefconfig Kconfig
./.tmp.config.wooorQeqQp:4819:warning: unexpected data: SND_SOC_SOF_HDA_COMMON_HDMI_CODEC=y

    And build sccuessfully with merge "CONFIG_SND_SOC_SOF_HDA_COMMON_HDMI_CODEC=y" config. Is this right?

    But ICL always display no sound card when "aplay -l" to check after system boot up.
    Check dmesg
    pr1155_dmesg.txt

    CML HDA platform can work successfully, still under testing.

  8. YvonneYang2 commented on Sep 16, 2019

    @YvonneYang2
    YvonneYang2
    on Sep 16, 2019
    Author

    Met same aplay-l display no soundcards issue on cml hda notebook after module reload test. And now always cannot boot up successfully.

  9. kv2019i commented on Sep 16, 2019

    @kv2019i
    kv2019i
    on Sep 16, 2019
    Collaborator

    @ClarexZhou wrote:

    @kv2019i , thesofproject/kconfig#15 can't be applied as below.
    [...]
    ./.tmp.config.wooorQeqQp:4819:warning: unexpected data: SND_SOC_SOF_HDA_COMMON_HDMI_CODEC=y

    Ack, my bad, fixed now in
    thesofproject/kconfig#15

    But ICL always display no sound card when "aplay -l" to check after system boot up.
    Check dmesg
    pr1155_dmesg.txt

    CML HDA platform can work successfully, still under testing.

    Hmm, ok. This is bug:
    #1184

    ... I have hit this on CFL as well, so not ICL specific, but seems to happen more often. As a temporary work-around (to enable other testing), the bug can be avoided by blacklisting the SOF module at boot and modprobe SOF "snd_sof_pci" module only after system has booted up. This seems to avoid issue 1184 . But this is only a temporary help. I will look into this issue.

    FYI @YvonneYang2

  10. YvonneYang2 commented on Sep 17, 2019

    @YvonneYang2
    YvonneYang2
    on Sep 17, 2019
    Author

    Added SOF "snd_sof_pci" module in blacklist.conf, reboot system, then modprobe "snd_sof_pci" module. But it seems not work for both CML and ICL, module cannot load successfully, aplay -l still shows no soundcard.

    Check dmesg:
    dmesg.log

  11. kv2019i commented on Sep 17, 2019

    @kv2019i
    kv2019i
    on Sep 17, 2019
    Collaborator

    @YvonneYang2 wrote:

    Added SOF "snd_sof_pci" module in blacklist.conf, reboot system, then modprobe "snd_sof_pci" module. But it seems not work for both CML and ICL, module cannot load successfully, aplay -l still shows no soundcard.

    Ack, will look into this. Based on the log, this seems like issue #1184 :
    [ 113.870011] snd_hda_codec_hdmi ehdaudio0D2: HDMI: failed to get afg sub nodes
    [ 113.870022] snd_hda_codec_hdmi ehdaudio0D2: patch failed -22
    [ 113.870113] snd_hda_codec_hdmi ehdaudio0D2: ASoC: failed to probe component -22

    But it's very good data point this is happening more often with the new HDA-HDMI patchset.

  12. wenqingfu commented on Sep 26, 2019

    @wenqingfu
    wenqingfu
    on Sep 26, 2019

    I see this start showing up on GLK as well in CI. Previously, the HDMI audio detection was quite stable on GLK_BOB, I would say.

  13. kv2019i
    added
    P2Critical bugs or normal features
    on Oct 8, 2019

  14. kv2019i commented on Oct 8, 2019

    @kv2019i
    kv2019i
    on Oct 8, 2019
    Collaborator

    This bug should be fixed with combination of patches to i915 driver and SOF. While waiting for patches to be accepted, can be tested with PR #1155

  15. dengyangchao commented on Oct 11, 2019

    @dengyangchao
    dengyangchao
    on Oct 11, 2019

    issue is fixed by PR1304, close the issue

  16. dengyangchao
    closed this as completedon Oct 11, 2019
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Metadata

Metadata

Assignees

Labels

HDAApplies to HD-Audio bus for codec connectionICLApplies to Icelake platformP2Critical bugs or normal featuresbugSomething isn't workingreuse legacy HDMI codecReuse legacy HDA HDMI codec driver snd-hda-codec-hdmi

Type

No type

Projects

No projects

    Milestone

    No milestone

    Relationships

    None yet

    Development

    No branches or pull requests

    Issue actions