Skip to content

Is any of the builds compatible with Lilygo T-A7670E? #35

Closed
Closed
Is any of the builds compatible with Lilygo T-A7670E?#35
Labels
questionFurther information is requested

Description

@spitfire
spitfire
opened on Dec 6, 2024

I got a Lilygo T-A7670E (https://lilygo.cc/products/t-sim-a7670e) with built in GPS and LTE, can it be used with any of the builds you're providing?

Activity

  1. adlerre commented on Dec 6, 2024

    @adlerre
    adlerre
    on Dec 6, 2024
    Owner

    Have you tried the A7670X build?

  2. adlerre
    added
    questionFurther information is requested
    on Dec 6, 2024

  3. marcoraddatz commented on Dec 13, 2024

    @marcoraddatz
    marcoraddatz
    on Dec 13, 2024

    Yes, it is. I have the same product.

  4. spitfire commented on Dec 18, 2024

    @spitfire
    spitfire
    on Dec 18, 2024
    Author

    I finally got around to configuring MQTT broker and finally T-A7670E. I've used the A7670X build of 0.11, but it fails to connect to my ELM 327 and I don't know why. What can I do to troubleshoot it?

    I've connected to serial via USB to grab the logs:

    ets Jul 29 2019 12:21:46

rst:0x1 (POWERON_RESET),boot:0x12 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:1184
load:0x40078000,len:13232
load:0x40080400,len:3028
entry 0x400805e4
E (786) esp_core_dump_flash: No core du������ѥѥ���found!
E (787) esp_core_dump_flash: No core dump partition found!
Start Access Point...WiFi AP stopped.
WiFi AP started.
AP - IP address: 192.168.4.1
HTTP server started
Start modem...
Initializing modem...
Modem Name: A7670E-FASE
Modem Info: Manufacturer: SIMCOM INCORPORATED Model: A7670E-FASE Revision: A7670M7_V1.11.1 IMEI: <redacted>
Waiting for network......success
Network connected
Connecting to internet......success
GPRS connected
IP Address: 100.72.48.250
Enabling GPS/GNSS/GLONASS......success
Discover Bluetooth devices...
>>>>>>>>>>>Found a new device: Name: OBDII, Address: 00:10:cc:4f:36:03, cod: 0x10091c, rssi: -48
Stopping discover...stopped
Search device: OBDII
 ----- 00:10:cc:4f:36:03  OBDII -48
scanned for services, found 1
     channel 1 (JL_SPP)
connecting to 00:10:cc:4f:36:03 - 1
Couldn't connect to OBD scanner - Phase 2

    The lights on it stop blinking and turn solid (as if the connection was established) when ESP32 is trying to connect, but no dice.
    This is the adapter I'm using:
    IMG_1980

  5. spitfire commented on Dec 18, 2024

    @spitfire
    spitfire
    on Dec 18, 2024
    Author

    Yes, it is. I have the same product.

    @marcoraddatz thanks! A bit off topic, but do you have a case for it? I have a 3d printer, but don't know how to create any models really.

  6. adlerre commented on Dec 19, 2024

    @adlerre
    adlerre
    on Dec 19, 2024
    Owner

    The lights on it stop blinking and turn solid (as if the connection was established) when ESP32 is trying to connect, but no dice.

    This is a problem with this ELM327 adapter, it is too slow. Phase 2 means it is connecting to the car. If the lights are solid, it is trying to get the right protocol. You have 2 options: be patient or go to settings and select the right connection protocol.
    If you want to avoid these problems, use a better adapter. I stopped using this one since a while because of these problems.

    I am currently using this one. Adapter

    @marcoraddatz thanks! A bit off topic, but do you have a case for it? I have a 3d printer, but don't know how to create any models really.

    You can try this case.
    But I'm not done yet, it's for my new device which I want support.

  7. spitfire commented on Dec 19, 2024

    @spitfire
    spitfire
    on Dec 19, 2024
    Author

    This is a problem with this ELM327 adapter, it is too slow. Phase 2 means it is connecting to the car. If the lights are solid, it is trying to get the right protocol. You have 2 options: be patient or go to settings and select the right connection protocol. If you want to avoid these problems, use a better adapter. I stopped using this one since a while because of these problems.

    By connection protocol you mean the one adapter talks to my car via OBD and is dependent on the model of my car? Any idea what would I use for an Opel Astra H?

    I am currently using this one. Adapter

    Ooo, that is really pricey (about 50x more than this one) and it would more than double the cost of the whole project (ESP32 was ~32$) and make it really not viable to me. It is also huge, and would not fit and let me close the lid over the adapter. If setting the protocol manually doesn't work are there any other options you would recommend that would place me between 1,29$ and 49€? ;)

    I have one more adapter that works with my iPhone, but wasn't getting discovered by ODB2MQTT, I guess it won't work with it?
    IMG_1986

    You can try this case. But I'm not done yet, it's for my new device which I want support.

    Thanks, I'm printing it now and will give it a try! I found https://github.com/Xinyuan-LilyGO/LilyGO-T-A76XX/blob/main/dimensions/T-A7670X-Shell.7z on manufacturer's GitHub but it's terribly overcomplicated (a lot of knobs and small parts for no good reason):
    IMG_1988
    and not practical - it seems to have a place to but the GPS antenna in...but it doesn't fully fit (and its cable is too short to reach out through the hole to be placed outside):
    IMG_1990
    IMG_1989

  8. adlerre commented on Dec 19, 2024

    @adlerre
    adlerre
    on Dec 19, 2024
    Owner

    By connection protocol you mean the one adapter talks to my car via OBD and is dependent on the model of my car? Any idea what would I use for an Opel Astra H?

    Protocol ISO_15765_11_BIT_500_KBAUD should work!

    Ooo, that is really pricey (about 50x more than this one) and it would more than double the cost of the whole project (ESP32 was ~32$) and make it really not viable to me. It is also huge, and would not fit and let me close the lid over the adapter. If setting the protocol manually doesn't work are there any other options you would recommend that would place me between 1,29$ and 49€? ;)

    You can try this, but I don't know if it works. Setting the protocol should help and save money too. ;)

    I have one more adapter that works with my iPhone, but wasn't getting discovered by ODB2MQTT, I guess it won't work with it?

    Is there a button to enable pairing? If so, press and let it detect, or you can get the MAC address of the device from your iPhone.

  9. spitfire commented on Dec 19, 2024

    @spitfire
    spitfire
    on Dec 19, 2024
    Author

    Protocol ISO_15765_11_BIT_500_KBAUD should work!

    Thanks, I'll try it!

    Is there a button to enable pairing? If so, press and let it detect, or you can get the MAC address of the device from your iPhone.

    There isn't one, I will try to work with it if the blue one doesn't work - maybe it was pairing to my phone and not being discoverable because of that.

    An update on your case - some of the holes don't fit - I've aligned it to the screw holed at the end (bottom ones on this photo) of the box:
    IMG_1992

    Switch cutout is fine:
    IMG_1993

    Port openings are off (especially one for USB-C):
    IMG_1994
    The ports are too far from the openings for the plug to go into the socket (at least for microUSB):
    IMG_1996

    Do you think I could hot glue the GPS antenna to the bottom of the case? Its cable doesn't even let it reach the side of the case where the cable openings are:
    IMG_1995

  10. adlerre commented on Dec 19, 2024

    @adlerre
    adlerre
    on Dec 19, 2024
    Owner

    I'm using this with a external LTE/GPS antenna.

    IMG_1173

    In the next few days I'll build a new one with better connection holes and support for an internal GPS antenna.

  11. adlerre commented on Dec 25, 2024

    @adlerre
    adlerre
    on Dec 25, 2024
    Owner

    A little Christmas present for you! Case

    Merry Christmas!

    case

  12. spitfire commented on Dec 25, 2024

    @spitfire
    spitfire
    on Dec 25, 2024
    Author

    A little Christmas present for you! Case

    Merry Christmas!

    case

    That looks great, Merry Christmas to you too!

  13. adlerre
    pinned this issue on Jan 10, 2025
  14. adlerre
    closed this as completedon Jan 10, 2025
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Metadata

Metadata

Assignees

No one assigned

    Labels

    questionFurther information is requested

    Projects

    No projects

      Milestone

      No milestone

      Relationships

      None yet

      Development

      No branches or pull requests

      Issue actions