[Feature Request] - Add Accent input to VCA

What would be nice is if a VCA had an Accent input as well as the normal CV from an envelope generator. It could have a CV knob that lets you choose the amount of accent when it arrives. It seems that summing the EG CV input with the Accent input is all that's needed. Of course, it may not be that simple.
Thanks for considering. I tend to use the Fundamental VCA most frequently since it's very simple in appearance and function and has graphical feedback. I use yours when I need stereo VCAs. I use your ADSR almost exclusively and Bogaudio on occasion.
Mike

Thanks Mike, is it possible to recreate the exact behavior you are looking for, using some modules together? If so, an example patch would be great, to see exactly what you want.
Let's see if I understand:

We need an extra input port, for the accent signal
Accent signal (gate) present would sum it's designed % to the gain fader, right? (extra knob needed to set the %, basically is just an attenuator)
The accent signal would keep the gain raised as long as the signal is present.
What happens if the envelope signal finishes before the accent signal?

Hi!, I'll put a patch together for sure! I should be able to get to this today. Thanks!

…

On Mon, Jul 22, 2019 at 7:53 PM Freddy ***@***.***> wrote: Thanks Mike, is it possible to recreate the exact behavior you are looking for, using some modules together? If so, an example patch would be great, to see exactly what you want. Let's see if I understand: - We need an extra input port, for the accent signal - Accent signal (gate) present would sum it's designed % to the gain fader, right? (extra knob needed to set the %, basically is just an attenuator) - The accent signal would keep the gain raised as long as the signal is present. - What happens if the envelope signal finishes before the accent signal? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#48?email_source=notifications&email_token=ADSEGNAHKR6UDCNEQMELHYLQAZXBZA5CNFSM4IF6ZQ7KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2RYJ5Q#issuecomment-514032886>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ADSEGNG632CSC2VJHBA2L2DQAZXBZANCNFSM4IF6ZQ7A> .

Hi, Made an attempt to be fancy with this demo. See the attachments. I think what would need to happen is the Accent input would affect the amplitude of the attack only. The CV knob would adjust how much amplitude the accent would have. This scenario only allows for a set accent amount. Another scenario would be seen in Accent2.vcv where the accent is a cv and not just a gate or trigger. In this case, I'm using a separate line in the sequencer to create the accents. This creates a much nicer accent, but is very convoluted. To create the second scenario with a single module, there would need to be an Accent input on a VCA that was not a gate but an amplitude mod of the attack phase. The decay would come down from there. Hope this makes sense. And! Maybe there is a better way that others use that I'm not aware of. What I like about this way is I can adjust the accent on any note and make it slightly different making it sound more natural. Thanks! Mike

…

On Mon, Jul 22, 2019 at 7:53 PM Freddy ***@***.***> wrote: Thanks Mike, is it possible to recreate the exact behavior you are looking for, using some modules together? If so, an example patch would be great, to see exactly what you want. Let's see if I understand: - We need an extra input port, for the accent signal - Accent signal (gate) present would sum it's designed % to the gain fader, right? (extra knob needed to set the %, basically is just an attenuator) - The accent signal would keep the gain raised as long as the signal is present. - What happens if the envelope signal finishes before the accent signal? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#48?email_source=notifications&email_token=ADSEGNAHKR6UDCNEQMELHYLQAZXBZA5CNFSM4IF6ZQ7KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2RYJ5Q#issuecomment-514032886>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ADSEGNG632CSC2VJHBA2L2DQAZXBZANCNFSM4IF6ZQ7A> .

Hi Mike, can't see the attachments. can you try again?

Hopefully they show up this time. Sorry for the delay. Mike

…

On Thu, Jul 25, 2019 at 7:32 PM Freddy ***@***.***> wrote: Hi Mike, can't see the attachments. can you try again? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#48?email_source=notifications&email_token=ADSEGNBJWYJFQS72YFD7B5TQBJO4XA5CNFSM4IF6ZQ7KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD23KAXA#issuecomment-515285084>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ADSEGNDYXIABE2KTZS7X2J3QBJO4XANCNFSM4IF6ZQ7A> .

Let me try also through github.

It seems I can only paste images here and not patches.

Navigation Menu

Repository navigation

[Feature Request] - Add Accent input to VCA #48

Metadata

Assignees

Labels

Projects

Milestone

Relationships

Development

[Feature Request] - Add Accent input to VCA #48

Description

Activity

AScustomWorks commented on Jul 23, 2019

mikeloveridge commented on Jul 25, 2019

mikeloveridge commented on Jul 26, 2019

AScustomWorks commented on Jul 26, 2019

mikeloveridge commented on Jul 28, 2019

mikeloveridge commented on Jul 28, 2019

mikeloveridge commented on Jul 28, 2019

Metadata

Metadata

Assignees

Labels

Projects

Milestone

Relationships

Development

Issue actions